Satlink WS-6936 DVB-S&T Combo Agrandir l'image

Satlink WS-6936 DVB-S & T Combo

WS6936

Nouveau produit

Satlink WS-6936 DVB-S&T Combo Instrument with Spectrum Analyzer satellite
finder

Plus de détails

OUI Livraison +10j.

410,00 CHF

En savoir plus

 

Satlink WS-6936 DVB-S&T Combo Instrument with Spectrum Analyzer

DIGITAL SATELLITE (DVB-S) & TERRESTRIAL SIGNAL FINDER (DVB-T) Real Spectrum Analyzer

 

Now with dBm, dBmV or dBµV measurements in DVB-S+T

 

Satlink WS-6936 DVB-S&T is an simple Messcomputer for DVB-S+T

Satlink WS-6936 DVB-S&T has a built in TFT LC Display with 3,5" / 8,9cm

Satlink WS-6936 DVB-S&T is excellent for DVB-S+T antenna Installitions

Satlink WS-6936 DVB-S&T can also use as a DVB-S+T Receiver on a TV

Satlink WS-6936 DVB-S&T work with files from USB-stick (Format JPG + MP3)

 

AV-IN & OUTPUT

Satlink Satlink WS-6936 DVB-S&T can be connected as a standard receiver to a TV. In addition, the device has an AV input. At this, other playback devices or AV surveillance cameras to be connected!

 

MultimediaPlayer
Display of photos stored in JPG format and play MP3 files from your own USB drive!

 

PC Software CTK-DB TOOL

With the PC software "CTK-DB tool" you can edit the transponder / satellite list.

  • Satellite & Add Remove
  • Transponder Add / Remove

The final lists will be using a USB - memory stick to transfer to the meter.

For the first time in a economical digital meter, you are now able to view the actual channel on the screen of the meter. Now you can quickly and accurately align the satellite AND you can instantly check the stability of the channel right on the screen of the meter. Transponders, Frequency, Symbol Rate, Polarity, and other ettings can be modified by the user. There is never a need to send your meter in for a upgrade.

Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each nstall with confidence.

 

DVB-T:

  • COFDM
    Demodulated
  • Frequency range:46-870MHz
  • Spectrum Analyzer
  • Level range:40-110dBuV
  • Input Resistance:75ohm
  • Demodulation:QPSK,16QAM,64QAM
  • Test: BER, C/N, FEC Signal Quality and Strength
  • Multi-Channel Simultaneous Measurement
  • Auto Full Frequency Scan
  • Auto scan of frequency selected
  • Power supply at RFIN:5V/15V/24V*(100mA)
 

DVB-S:

  • Input
    Frequency range:950-2150MHz
  • Spectrum Analyzer
  • Input Level:-65dbm-25dbm
  • Input Resistance:75ohm
  • Symbol rate:2Msps-45Msps
  • Test: BER, C/N, FEC Signal Quality and Strength
  • Auto search: NIT Search ,Manul Search
  • DisEqC,22K Supported
  • LNB power supply :H + 18V + 13V 400mA
 

OTHER:

  • 8 menu languages: English, German, French, Portuguese, Spanish, Italian, Czech, Greek
  • 8.4V/3000mAH POWER Lion battery for real long working-time
  • 4,4" / 11cm Color LCD 16:9
  • Keypad with blue Backlight
  • Flashlight function (push F1 button for 3 sec)
  • Power adapter input: AC 90V-240V/50Hz
  • Power adapter output: DC 12V/1.5A
  • Working time:4-6 hours (full charge)
  • Charging time: 5 hours from flat
  • Car charger supplied
  • Dimension: 210 X 120 X 45mm
  • Net weight: 0,5kg
 

Technical Parameter:

 

Tuner DVB-T:

Connector:

IEC-Typ, IEC 169-2

Frequency Range:

76 MHZ - 870 MHZ

Signal Level:

40 dB/µV - 110 dB/µV

Demodulation:

CODFM

Mode:

2K, 8K

FEC:

1/2, 2/3, 3/4, 5/6 & 7/8

Channel Range:

6MHz / 7MHz / 8 MHz

 

Tuner DVB-S:

Connector:

F- Socket

Frequency Range:

950 MHz - 2150 MHz

Signal Level:

-65 dB/µV~-25 dB/µV

LNB Power:

13/18 V, max 400 mA

Mode:

2K, 8K

LNB Control:

22 KHz

DiSEqC :

Ver. 1.0, 1.2

 

MPEG Transport Stream A/V Decoding:

Transportstream:

MPEG-2 ISO/IEC 13818

Profile Level:

MPEG2 MP@ML

Input Rate:

15 Mbit/s Max

Video Resolution:

720 x 576 (PAL), 720 x 480 (NTSC)

Audio Decoding:

MPEG / MusiCam LayerI&II

 

Demodulator:

Front End:

QPSK

Symbolrate:

2 Mbps~45 Mbps

SCPC and MCPC:

YES

Spectrum Analyzer:

YES

 
 

MEMORY:

SDRAM:

16* MB

FLASH:

8 MB

 

Serial connection:

TYP:

USB

 

Power Supply:

Li-oN Battery

3000 mA/h

Voltage:

8,4 Volt

Charger:

90 - 240 V / AC - 12 V / DC 1 A

 

Package including:

  • 1X WS-6936
  • 1X DVB-T Antenne with Magnet Foot
  • 1X yellow Protective rubber cover
  • 1X large nylon carry bag with shoulder strap
  • 1X 220V charging adapter
  • 1X 12V car charger
  • 1X A / V Cable Adapter 3.5 jack to 3x RCA jack
  • 1X User manual in English
 
 

Sample Images:

 

SAT

 
 

Main-Menu

following sub-menu items can be selected:

  • DVB-S
  • DVB-T
  • Spectrum Analyzer SAT
  • Spectrum Analyzer DVB-T
  • Multimedia
  • System Setup
   
 

Fast-Search

Quick Search in the menu item you can select a desired satellite to search.

43 satellites are pre-programmed.

The satellite list can be edited with a special computer program and are then loaded with a USB memory stick to the device.

   
 

Quick Search / satellite selection

A variety of satellites are preprogrammed and are already in the database.

   
 

Satellite Scan:

After selecting the desired satellite you get into the search mode.

The following measured values are displayed:

  • Satellite position in degrees
  • Elevation angle in degrees
  • LNB tilt angle in degrees
  • signal strength as bars and as a percentage
  • Signal quality as a bar and a percentage
  • BER / BER Signal strength in dBmV (selection in the system: dBm, dBmV, dBmV)
  • S / N Signal to Noise Ratio

In this menu item to control is a transponder scan may be performed. Then can be displayed after
leaving the satellite search the channels found in picture and sound.

   
 

Zoom-Function

By switching in the satellite search, the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.

   
 

DISEQC 1.0/1.1

Here you can set the DiSEqC settings and store for up to 4 satellite DiSEqC ports.

   
 

DiSEqC motor control:

After selecting a satellite, you can gradually control a DiSEqC motor or with goto-X to a desired point.

The signal strength and quality appears.

   
 

Transponder Administration

Here you can add or delete transponders, and editing. The frequency, symbol rate and
polarization can be chosen freely.

   
 

Frequency - Spectrumanalyzer

Here you can analyze the received signal. Subtle changes are presented visually.

   
 

TV Picture

After leaving the menus you get into the TV-Bodus. It is presented in picture and sound. The aspect ratio can be switched in the system (4:3 / 16:9)

   
 

Program Informations:

Press the INFO button, opens the program information window.

All program information is displayed.

Furthermore, this information also to windo image signal control purposes.

   
 

System - Setup:

The system allows the following settings:

  • OSD language
  • Enter the longitude Enter the latitude
  • TV Aspect Ratio
  • Measured values (dBm, dBmV or dBmV)
  • time zone
  • Software update
  • Reset to factory settings
  • Display the software version
   

DVB-T

   
 

Quick-Find

In the Quick Find menu to select a transponder for search.

Select the country, the desired channel and the bandwidth.

In addition, can be turned on the power supply for active antennas.

   
 

Channel Scan

If a signal is received so the following measured values are displayed:

  • Signal strength "S" as a percentage and as a bar
  • Signal Quality "Q" as a percentage and as a bar
  • Bit Error Rate "Ber"
  • Signal to Noise Ratio "S/N" in dB
  • ***Now also with dBm, dBmV or dBµV Measurements!***

Be carried out to control a channel search. Then can be displayed after exiting the channels found in the search image and sound.

   
 

Zoom-Function

By switching in the Quick Seach , the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.

   
 

Channel-Scan

   
 

Freq-Checking

It is possible to measure five channels simultaneously and the measured values  simultaneously display.

 
 

Frequency - Spectrumanalyzer

Here you can analyze the received signal. Subtle changes are presented visually.

   
 

TV Picture

After leaving the menus you get into the TV-Bodus. It is presented in picture and sound. The aspect ratio can be switched in the system (4:3 / 16:9)

 
 

Program Informations:

Press the INFO button, opens the program information window.

All program information is displayed.

Furthermore, this information also to windo image signal control purposes.